Asko T744C User manual 8092823 Asko T744C EN - Page 16
Troubleshooting
View all Asko T744C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Troubleshooting The machine will not start Check • that the door is properly closed. • that the main power switch is on. • that any plug is connected. • that the house fuses have not been tripped. • that the overheating cut-out has not been triggered. The machine loses all power during a program The overheating cut-off shuts off the tumble dryer if the temperature is too high, caused by lint clogging the lint filter, for instance. • Clean the lint filter. • Check that the condenser is clean. Clean it if necessary. See the "Care and maintenance instructions" chapter. • Wait until the machine has cooled, then try starting it. If it still does not start: Call the Customer Care Center. Drying takes too long • Check that the lint filter is not blocked. See the "Care and maintenance instructions" chapter. • Check that the condenser is not blocked. See the "Care and maintenance instructions" chapter. • Prolonged drying times may also be due to the tumble dryer being located in a confined area or in a room that is too small, causing the air to become too hot. • Make sure that the tumble dryer has access to more cold air, open doors and/or windows, for example. Error messages L1 flashes The maximum program time has been reached. Read "Drying takes too long" in this chapter to find out what to do. L1 L2 Start Stop L3 16 Customer Care Center 1-800-898-1879 www.askousa.com