Asko T744C User manual 8092823 Asko T744C EN - Page 24

Installation instructions 2 1 Maximum height 40" 2a Electrical installation WARNING! The receptacle on the rear of the machine is designed to accommodate ASKO washers ONLY (rated 208-240 V.) To use this receptacle, you must use the ready-fitted plug supplied with the washing machine or an equivalent. ASKO washers rated 208-240 V have two internal fuses of 15 A each. The machine should only be connected to a grounded wall socket. WARNING! This appliance must be properly grounded. Refer to the "Important Safety Instructions" for grounding instructions. The power supply cord must be grounded. If the machine is to be used in a wet area, the supply must be protected by a residual current device. Connection to a permanently wired supply point must be made only by a qualified electrician. As supplied: Single-phase, 230 V, 60 Hz, 2500W heater rating 30 A circuit required Remove cover to access terminal box. (Requires a 20-Torx screwdriver.) 24 Customer Care Center 1-800-898-1879 www.askousa.com