Asko T744C User manual 8092823 Asko T744C EN - Page 23

Installation instructions Install in a closet ASKO's front panel controls make it possible to install the washers and dryers in a closet. Make sure there is a ½" (12mm) minimum clearance between units and cabinet or wall. To ensure proper ventilation, we recommend louvered doors, particularly for condenser dryers. Otherwise there must be ventilation openings in the door. See illustration for minimum ventilation openings: Condensed water Install the dryer so the condensed water will continuously flow into a drain or sink. To do this, follow the instructions below: 1. Connect the rubber hose supplied with the dryer to the blue nipple. 2. Run the hose to a drain or sink, as illustrated. NOTE! The drain hose must not be more than 40" above the floor. Customer Care Center 23 1-800-898-1879 www.askousa.com