Asko T794C Operating Instructions - Page 22

Installation instructions WARNING! WARNING - Risk of fire. Install the clothes dryer according to the manufacturer's instructions and local codes. To reduce the risk of of severe injury or death, follow all installation instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Positioning the tumble dryer The tumble dryer can be freestanding or stacked. Remember that the tumble dryer produces heat and should therefore not be located in a room that is too small. If the room is very small, drying will take longer due to the limited quantity of air. How to assemble the stacking kit: 1. Remove the two tip guards from the back of the tumble dryer. Replace the screws that held the tip guards in place. 2. Remove the two screws indicated on the back of the washing machine. WARNING! • Clothes dryer installation must be performed by a qualified installer. • For proper ventilation, the machine should not be installed behind a door. • The tumble dryer's toe kick ventilation must not be blocked by a rug or the like. NOTE! If the unit must be installed behind a door, the door should be louvered. (please see door ventilation requirements in the Built-in chapter). To improve ventilation, the door where the tumble dryer is located should be left open when the dryer is in use. Freestanding The tumble dryer can be positioned beside the washing machine. Stacking The tumble dryer can be placed on top of an ASKO washing machine. Use the two foot cups found in the document bag included with the machine and the two tip guards attached to the bottom of the back of the machine. 3. Secure the anti-tip device using the screws as shown in the picture. 4. Attach the plastic cups for mounting the tumble dryer's front feet to the washing machine's top cover. This is essential, as only when the tumble dryer's feet are resting in the plastic cups can you 22 Customer Care Center 1-800-898-1879 www.askousa.com