Asko T794C Operating Instructions - Page 27
Tighten the strain relief screws.
 |
View all Asko T794C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installation instructions 4 7 8 6 5. Remove ground wire (green with yellow stripes) from external ground connector screw and remove from center terminal block. 6. Connect ground (green) wire of cord to external ground conductor screw. 7. Connect neutral (white) wire of cord under center screw of terminal block. 8. Connect the other wires to outer screws. 9. Tighten the strain relief screws. 10. Replace terminal box cover on back of dryer. 11. Plug dryer into wall receptacle. 12. Turn power on at breaker/fuse box. Customer Care Center 27 1-800-898-1879 www.askousa.com
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22 -
23 -
24 -
25 -
26 -
27 -
28 -
29 -
30 -
31 -
32
 |
 |
4
6
7
8
5. Remove ground wire (green with yellow stripes)
from external ground connector screw and remove
from center terminal block.
6. Connect ground (green) wire of cord to external
ground conductor screw.
7. Connect neutral (white) wire of cord under center
screw of terminal block.
8. Connect the other wires to outer screws.
9. Tighten the strain relief screws.
10.Replace terminal box cover on back of dryer.
11.Plug dryer into wall receptacle.
12.Turn power on at breaker/fuse box.
27
Customer Care Center
1-800-898-1879
www.askousa.com
Installation instructions