Asko W640 User manual Use & Care Guide EN ES FR - Page 14

The Delayed Start Menu This menu lets you set a delayed start from 1 to 12 hours. This means you can set the washer to start at the most convenient time for you, such as an hour before you arrive home from work. This feature is also useful in areas where utility companies offer discount rates during certain hours. Select time for delayedstart < - + > P1 0 M en u E n ter 1. Use the Arrow buttons to increase or decrease the delay time. (The numbers indicate hours.) 2. When the number of hours you want to delay starting the machine displays, press ENTER. The LED will display the delay start time. Press MENU to advance to the next menu. The Options Menu This menu lets you set several options. Only the options available with the wash program you selected will display. (See ”The Program Menu” table on page 11.) SoPepreltr1ei-po6csmtno0s0ak < Off > P1 0 M en u E n ter 1. On this menu, you press ENTER to advance through the options, rather than pressing MENU. 2. Press an Arrow button to toggle between Off and On. 3. When your preference displays, press ENTER. The LED will display the new options. Continue to press ENTER until the LED displays your new program. RESTORING A PRESET PROGRAM To restore a preset program to its original settings, simply press the button for the preset program you want to restore and hold it down while your press ENTER. The program will revert to its original settings. NOTE: If you change the P3 program then decide to restore its original settings, after pressing P3 and ENTER, you must go into the Options menu (see page 14) and turn off Short Spin. Page 14 CHANGING THE LANGUAGE ON THE LED WINDOW There are eleven languages available for the LED window: ¨ English ¨ Swedish ¨ French ¨ Danish ¨ Spanish ¨ Norwegian ¨ Portuguese ¨ Netherlands ¨ Italian ¨ Finnish ¨ German To change the language, follow the steps below: 1. Turn the machine off then on again. 2. Press ENTER five times in succession then press P1 five times. (This must be done within 15 seconds.) 3. When the Language menu displays, press an Arrow button to advance through the menu to the desired language. 4. Once the correct language displays, press ENTER to program the LED window to display the language you selected. CHANGING THE TEMPERATURE READOUT ON THE LED WINDOW FROM CELSIUS TO FAHRENHEIT You can change the temperature readout on the LED window from Celsius to Fahrenheit and vice versa. To do this follow the steps below: 1. Turn the machine off then on again. 2. Press ENTER five times in succession then press P2 five times. (This must be done within 15 seconds.) 3. When the Temperature menu displays, press an Arrow button to toggle between Fahrenheit and Celsius. 4. When your preference displays, press ENTER to program the LED window to display the temperature reading you selected. CHILD-SAFE START (W640/W660) As a safety measure, you can program the W640 and W660 not to start unless the START button is held down for three seconds. To do this, follow the steps below: 1. Turn the machine off then on. 2. Press ENTER five times, then press P3 five times. (This must be done within 15 seconds.) 3. “Delayed start” displays with “0” flashing in the lower right corner. Press the right Arrow button to toggle the display to “3.” Child-Safe Menu Button Please note that when you set the child-safe Start button, the Menu button is automatically programmed to delay for three seconds before it becomes active. This prevents a child from accidentally changing the program settings. When you want to change a program, press the Menu button for three seconds to activate the menus. The Menu button will work normally (without the 3-second delay) until you have completed your changes. If it is not pressed for two minutes, it will automatically revert back to the child-safe mode.