Asus AAM6000EV X1 User Manual - Page 9
HUB-PC Switch
View all Asus AAM6000EV X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
3. Installing the ADSL Modem 3.2 Rear Panel (Cont') 7. HUB-PC Switch The HUB-PC switch controls the crossover function. Modem-to-PC connection must contain crossovers. When connecting the modem to a PC, leaving the switch on the default position PC allows you to implement crossover cabling without using a crossover cable. When connecting the modem to an Ethernet hub's RJ-45 downlink port, use a pen or screwdriver to slide the switch to HUB and implement straight-through cabling. If you run out of the hub's downlink ports and connect the modem to the uplink port, you must slide the switch to the position of PC. Example 1. Modem to PC Example 2. Modem to Hub (Downlink) Example 3. Modem to Hub (Uplink) UPLINK 1234 5678 UPLINK 1234 5678 HUB PC When using a PC with the modem, adjust the HUB-PC switch to the position of PC. HUB PC When connecting the modem to an Ethernet hub's downlink port, adjust the HUB-PC switch to the position of HUB. HUB PC When connecting the modem to an Ethernet hub's uplink port, adjust the HUBPC switch to the position of PC. 9