Asus C8HM70-I HDMI C8HM70-I User's Manual - Page 23
Serial ATA 3.0Gb/s connectors 7-pin SATA3G [blue], Serial ATA 6.0Gb/s connectors 7-pin SATA6G [gray] - hdmi
View all Asus C8HM70-I HDMI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
GND RSATA_RXP1 RSATA_RXN1 RSATA_TXN1 RSATA_TXP1 GND GND 6. Serial ATA 3.0Gb/s connectors (7-pin SATA3G [blue]) This connector connects to Serial ATA 3.0 Gb/s hard disk drive or optical drive via Serial ATA 3.0 Gb/s signal cables. SATA3G_1 C8HM70-I/HDMI C8HM70-I/HDMI SATA 3.0Gb/s connector • You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives. • To configure the default SATA type in BIOS, click Advanced Mode > Advanced tab > SATA Configuration > SATA Mode Selection. • When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI]. See section 2.5.3 SATA Configuration for details. 7. Serial ATA 6.0Gb/s connectors (7-pin SATA6G [gray]) This connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. SATA6G_1 C8HM70-I/HDMI C8HM70-I/HDMI SATA 6.0Gb/s connector • You must install Windows® XP Service Pack 3 or later version before using Serial ATA hard disk drives. • When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to [AHCI]. See section 2.5.3 SATA Configuration for details. GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND ASUS C8HM70-I Series 1-13