Asus DSBF-D16 User Manual - Page 162
Managing Arrays, Viewing volume properties
View all Asus DSBF-D16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
5.5.4 Managing Arrays The LSI Logic MPT Setup Utility allows you to perform other tasks related to configuring and maintaining IM and IME volumes. Refer to this section to view volume properties, manage the hot spare disk, synchronize the array, activate the array, and delete the array. Viewing volume properties To view volume properties: 1. On the main menu, select RAID Properties. LSI Logic Config Utility Adapter Properties -- SAS1068 v6.16.00.00 (2007.05.07) Adapter PCI Slot PCI Address(Bus/Dev/Func) MPT Firmware Revision SAS Address NVIDIA Version Status Boot Order Boot Support SAS1068 00 05.03.00 1.15.00.00-IR 500E0180:60831008 25.02 Disabled 0 (Enabled BIOS & OS) RAID Properties SAS Topology Advanced Adapter Properties Esc = Exit Menu F1/Shift+1 = Help Enter = Select Item -/+ = Change Item 2. On the next screen that appears, select View Existing Array. LSI Logic Config Utility v6.16.00.00 (2007.05.07) Select New Array Type -- SAS1068 View Existing Array View the existing configuration. Create IM Volume Create IME Volume Create IS Volume Create Integrated Mirror Array of 2 disks plus an optional hot spare. Data on the primary disk may be migrated. Create Integrated Mirrored Enhanced Array of 3 to 8 disks including an optional hot spare. ALL DATA on array disks will be DELETED! Create Integrated Striping array of 2 to 8 disks. ALL DATA on array disks will be DELETED! Esc = Exit Menu F1/Shift+1 = Help Enter = Choose array type to create 5-48 Chapter 5: RAID configuration