Asus DSBF-D16 User Manual - Page 55
LAN controller setting 3-pin LAN_EN1, LAN_EN3, FAN_SEL2, 82573L Gigabit LAN controllers.
View all Asus DSBF-D16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
® ® 4. LAN controller setting (3-pin LAN_EN1, LAN_EN3, LAN_EN4) These jumpers allow you to enable or disable the onboard Intel® 82563EB Gigabit LAN controller and the onboard Intel® 82573L Gigabit LAN controllers. Set to pins 1-2 to activate the Gigabit LAN feature. LAN_EN1 (82563EB) 12 23 Enable (Default) Disable LAN_EN3 (82573L) 12 23 DSBF-D16 Series LAN setting Enable (Default) Disable LAN_EN4 (82573L) 12 23 Enable (Default) Disable 5. Fan control setting (3-pin FAN_SEL1, FAN_SEL2) These jumpers allow you to switch for fan pin selection. The FAN_SEL1 jumper is for the CPU fans control and FAN_SEL2 is for the other fans control including front fans, rear fans and FB-DIMM fans. Set to pins 1-2 for 4-pin fans or pins 2-3 for 3-pin fans. DSBF-D16 Series VGA setting FAN_SEL2 12 23 4-PIN FAN 3-PIN FAN (Default) FAN_SEL1 12 23 4-PIN FAN 3-PIN FAN (Default) • If you use a 4-pin fan but set the jumper to pin 2-3, the fan you installed may not work. • If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan controll will not work and the fan you installed will always run at full speed. ASUS DSBF-D16 Series 2-33