Asus DSBF-D16 User Manual - Page 87
IDE Primary Master/Slave, SATA Port 1/2/3/4, Type: [Auto], Multi-Sector Transfers: [Disabled]
View all Asus DSBF-D16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
4.3.5 IDE Primary Master/Slave; SATA Port 1/2/3/4 Main PhoenixBIOS Setup Utility IDE Primary Master Type: [Auto] Multi-Sector Transfers: LBA Mode Control: 32-Bit I/O: Transfer Mode: Ultra DMA Mode: [Disabled] [Disabled] [Disabled] [Standard] [Disabled] Item Specific Help Auto = Autotyping. None = Disabling drive. ATAPI Removable = ATAPI media (e.g., LS120, USB Floppy, USB Zip). CD-ROM = CD-ROM drive. IDE Removable = IDE removable media (e.g., IDE Zip drive). Other ATAPI = Other ATAPI media. User = You simply the hard disk drive type. F1 Help ESC Exit ↑↓ Select Item →← Select Menu -/+ Change Values F9 Setup Defaults Enter Select Sub-Menu F10 Save and Exit Type: [Auto] Selects the type of IDE drive. Setting to [Auto] allows automatic selection of the appropriate IDE device type. Select [CD-ROM] if you are specifically configuring a CD-ROM drive. Select [ATAPI Removable] if your device is either a ZIP, LS-120, or MO drive. Select [User] to manually enter the parameters of the device. Configuration options: [Auto] [User] [Other ATAPI] [IDE Removable] [CD‑ROM] [ATAPI Removable] [None] • Except for 32-Bit I/O item, the following items become user-configurable when the Type item is not set to [Auto]. • Suggest you to keep the default setting of this item [Auto]. • For items that have no sub-menu, you have to use -/+ for values changing. Multi-Sector Transfers: [Disabled] Specify the number of sectors per block for multiple sector transfers. When set to [2~16 Sectors], the data transfer from and to the device occurs multiple sectors at a time if the device supports multi-sector transfer feature. When set to [Disabled], the data transfer from and to the device occurs one sector at a time. Configuration options: [Disabled] [2 Sectors] [4 Sectors] [8 Sectors] [16 Sectors] LBA Mode Control: [Disabled] Enables or disables the LBA mode. Setting to [Enabled] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Enabled] 32-Bit I/O: [Disabled] Enables or disables 32-bit IDE data transfer. Configuration options: [Disabled] [Enabled] ASUS DSBF-D16 Series 4-13