Asus DSEB-D16 SAS DSEB-D16 User's Manual for English Edition - Page 62
USB connector 10-1 pin USB34, CPU and system fan connectors 4-pin CPU_FAN1/2, REAR_FAN1/2
View all Asus DSEB-D16 SAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
8. USB connector (10-1 pin USB34) This connector is for USB 2.0 ports. Connect the USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This USB connector complies with USB 2.0 specification that supports up to 480 Mbps connection speed. Power USB PortB(-) USB PortB(+) GND NC ® Power USB PortA(-) USB PortA(+) GND USB34 PIN1 DSEB-D16 Series USB connector The USB port module is purchased separately. 9. CPU and system fan connectors (4-pin CPU_FAN1/2, REAR_FAN1/2, FRNT_FAN1/2/3/4, FBD_FAN1/2) The fan connectors support cooling fans of 350 mA ~ 740 mA (8.88 W max.) or a total of 3.15 A ~ 6.66 A (53.28 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! 2-42 ® CPU_FAN1 FBD_FAN1 REAR_FAN1 REAR_FAN2 FBD_FAN2 CPU_FAN2 FRNT_FAN1 FRNT_FAN2 FRNT_FAN4 FRNT_FAN3 DSEB-D16 Series Fan connectors CPU_FAN1 PWM Control FAN Speed FAN Power GND CPU_FAN2 GND FAN Power FAN Speed PWM Control FBD_FAN1 PWM Control FAN Speed FAN Power GND REAR_FAN1 REAR_FAN2 FBD_FAN2 GND FAN Power FAN Speed PWM Control PWM Control FAN Speed FAN Power GND PWM Control FAN Speed FAN Power GND FRNT_FAN1 GND FAN Power FAN Speed PWM Control FRNT_FAN2 GND FAN Power FAN Speed PWM Control FRNT_FAN4 PWM Control FAN Speed FAN Power GND FRNT_FAN3 GND FAN Power FAN Speed PWM Control Chapter 2: Hardware information