Asus DSEB-DG SAS User Guide - Page 42
Installing the MemCool FB-DIMM fan opional, from the fan base.
View all Asus DSEB-DG SAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
2.4.6 Installing the MemCool FB-DIMM fan (opional) The FB-DIMMs generate heat during continued operation. To ensure optimum thermal condition and performance, install the optional MemCool FB-DIMM fan. To install the optional FB-DIMM fan: 1. Locate the three FB-DIMM fan holes on the motherboard. 2. Disengage the fan top cover from the fan base. You can do this by firmly gripping the top cover by the clamps to release the hooks, then pull up the top cover carefully until it separates from the fan base. Top cover clamp DO NOT remove the fan from the fan base. Top cover hook Fan base 3. Position the fan base over the DIMMs, and insert the fan base legs into the FB-DIMM holes until the legs are securely in place. For instructional purposes only, no FB-DIMM is installed on any of the slots. 2-22 Chapter 2: Hardware information