Asus DSEB-DG SAS User Guide - Page 50
Intel, 6321ESB SATA port S/W RAID setting 3-pin RAID_SEL1, Fan control setting 3-pin CPUFAN_SET1
View all Asus DSEB-DG SAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
4. Fan control setting (3-pin CPUFAN_SET1, CHAFAN_SET1) These jumpers allow you to switch for fan pin selection. The CPUFAN_SET1 jumper is for the CPU fans control and CHAFAN_SET1 is for the other fans control including front fans, rear fans and FB-DIMM fans. Set to pins 1-2 for 4-pin fans or pins 2-3 for 3-pin fans. ® DSEB-DG Series FAN setting FAN_SET1 (CPU Fan) FAN_SET2 (Other Fans) 12 23 Balanced DC FAN (Default) • If you use a 4-pin fan but set the jumper to pin 2-3, the fan you installed may not work. • If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan controll will not work and the fan you installed will always run at full speed. 5. Intel® 6321ESB SATA port S/W RAID setting (3-pin RAID_SEL1) (DSEB-DG model only) This jumper allows you to select the Serial ATA RAID configuration utility to use when you create disk arrays. Both utilities are supported by the Intel® 6321ESB. Place the jumper caps on pins 1-2 if you want to use the LSI MegaRAID Serial ATA RAID utility (default); otherwise, place the jumper caps on pins 2-3 to use the Intel® Matrix Storage Manager (IMSM). ® DSEB-DG Series RAID setting RAID_SEL1 2 1 LSI (Default) 3 2 Intel 2-30 Chapter 2: Hardware information