Asus E500 G5 User Manual - Page 24
Memory configurations
![]() |
View all Asus E500 G5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Memory configurations You may install 4 GB, 8 GB 16 GB, and 32 GB unbuffered and ECC and non‑ECC DDR4 DIMMs into the DIMM sockets. You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. • For system stability, use a more efficient memory cooling system to support a full memory load (4 DIMMs) or overclocking condition. • Always install the DIMMS with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules. • Visit the ASUS website for the latest QVL. 2-8 Chapter 2: Hardware Setup
![](/manual_guide/products/asus-e500-g5-user-manual-0ef43e2/24.png)