Asus E500 G5 User Manual - Page 77
PCH-FW Configuration, 4.6.7 Onboard Devices Configuration, HD Audio, Intel LAN1-2 Controller
View all Asus E500 G5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
4.6.6 PCH-FW Configuration This item allows you to configure the firmware TPM. 4.6.7 Onboard Devices Configuration The items in this menu allow you to switch between PCIe Lanes and configure onboard devices. HD Audio This item allows you to use the Azalia High Definition Audio Controller. Configuration options: [Disabled] [Enabled] Intel LAN1-2 Controller This item allows you to enable or disable the Intel LAN controllers. Configuration options: [Disabled] [Enabled] PCIEX16_4 & SATA5/6/7/8 Configuration [PCIEX16_4 x2 mode & SATA5/6] Enable SATA port 5 and port 6. PCIEX16_4 width is x2. [SATA5/6/7/8 mode] Supports all SATA devices. Please note that PCIEX16_4 cannot be used in this mode. [PCIEX16_4 x4 mode] Only supports PCIEX16_4. Please note that from SATA port 5 to port 8 cannot be used in this mode. 4.6.8 APM Configuration The items in this menu allow you to set system wake and sleep settings. ErP Ready This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] 4.6.9 USB Configuration The items in this menu allow you to change the USB-related features. The Mass Storage Devices item shows the auto-detected values. If no USB device is detected, the item shows None. USB Single Port Control This item allows you to enable or disable the individual USB ports. Refer to section 1.1.2 Motherboard layout for the location of the USB ports. ASUS E500 G5 4-17