Asus H310A-EM-A User Manual English - Page 48

Internal CPU Power Management

Get Asus H310A-EM-A PDF manuals and user guides View all Asus H310A-EM-A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

CPU Graphics Load-Line Calibration Load-line is defined by Intel VRM specification and affects the GT power voltage. The GT working voltage will decrease proportionally depending on the GT loading. Higher levels of the load-line calibration can get a higher voltage and a better overclocking performance but increases the GT and VRM thermal. Select from level 1 to 7 to adjust the GT power voltage from 0% to 100%. Configuration options: [Auto] [Level 1] [Level 2] [Level 3] [Level 4] [Level 5] [Level 6] [Level 7] NOTE: The boosted performance may vary depending on the GT specification. Do not remove the thermal module. 3.3.8 Internal CPU Power Management The subitems in this menu allow you to set the CPU ratio and features. Intel(R) SpeedStep(tm) Allows the operating system to dynamically adjust the processor voltage and cores frequency to decrease the average power consumption and decrease average heat production. Configuration options: [Auto] [Enabled] [Disabled] Turbo Mode Allows you to enable your processor cores to run faster than the base operating frequency when it is below power, current and specification limit. Configuration options: [Disabled] [Enabled] Turbo Mode Parameters NOTE: The following items appear only when you set the Turbo Mode to [Enabled]. Long Duration Package Power Limit As know as the power limit 1 in Watts. The default value will be the TDP (thermal design power). The turbo ratio can be maintained for a duration to exceed the TDP for the maximum system performance. Configuration options: [Auto] [1] - [4095] Package Power Time Window As know as the power limit 1 in seconds. The value indicates the maintained duration for the turbo ratio to exceed TDP (thermal design power). Configuration options: [Auto] [1] - [127] Short Duration Package Power Limit Also know as the power limit 2 in Watts. It is the second power limit to provide a rapid protection when the package power exceed power limit 1. The default setting is 1.25 times the power limit 1. According to Intel, the platform must be capable of supporting the duration for up to 10 msec when the turbo ratio exceeds the power limit 2. Configuration options: [Auto] 3-14 H310A-EM-A

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
3-14
H310A-EM-A
CPU Graphics Load-Line Calibration
Load-line is defined by Intel VRM specification and affects the GT power
voltage. The GT working voltage will decrease proportionally depending on
the GT loading. Higher levels of the load-line calibration can get a higher
voltage and a better overclocking performance but increases the GT and
VRM thermal. Select from level 1 to 7 to adjust the GT power voltage from
0% to 100%. Configuration options: [Auto] [Level 1] [Level 2] [Level 3] [Level
4] [Level 5] [Level 6] [Level 7]
NOTE:
The boosted performance may vary depending on the GT specification. Do not
remove the thermal module.
3.3.8
Internal CPU Power Management
The subitems in this menu allow you to set the CPU ratio and features.
Intel(R) SpeedStep(tm)
Allows the operating system to dynamically adjust the processor voltage and
cores frequency to decrease the average power consumption and decrease
average heat production.
Configuration options: [Auto] [Enabled] [Disabled]
Turbo Mode
Allows you to enable your processor cores to run faster than the base
operating frequency when it is below power, current and specification limit.
Configuration options: [Disabled] [Enabled]
Turbo Mode Parameters
NOTE:
The following items appear only when you set the Turbo Mode to
[Enabled]
.
Long Duration Package Power Limit
As know as the power limit 1 in Watts. The default value will be the TDP
(thermal design power). The turbo ratio can be maintained for a duration to
exceed the TDP for the maximum system performance.
Configuration options: [Auto] [1] - [4095]
Package Power Time Window
As know as the power limit 1 in seconds. The value indicates the
maintained duration for the turbo ratio to exceed TDP (thermal design
power).
Configuration options: [Auto] [1] - [127]
Short Duration Package Power Limit
Also know as the power limit 2 in Watts. It is the second power limit to
provide a rapid protection when the package power exceed power limit
1. The default setting is 1.25 times the power limit 1. According to Intel,
the platform must be capable of supporting the duration for up to 10 msec
when the turbo ratio exceeds the power limit 2.
Configuration options: [Auto]