Asus H310A-EM-A User Manual English - Page 58
APM Configuration
![]() |
View all Asus H310A-EM-A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Device Mode [STD Printer Mode] Allows you to change the Printer Port mode. Configuration options: [STD Printer Mode] [SPP Mode] [EPP-1.9 and SPP Mode] [EPP-1.7 and SPP Mode] [ECP Mode] [ECP and EPP 1.9 Mode] [ECP and EPP 1.7 Mode] 3.4.8 APM Configuration ErP Ready [Disabled] Allows BIOS to switch off some power at S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options will be switched off. Configuration options: [Enable(S4+S5)] [Enable(S5)] [Disabled] CEC Ready [Disabled] Enable this item to allow your system to comply with CEC (California Energy Commission) regulations to save some power at S0 state. Configuration options: [Enable] [Disabled] Restore AC Power Loss [Power Off] Allows you to select AC power state when power is re-applied after a power failure. Configuration options: [S5 State] [S0 State] [Last State] Power On By PCI-E/PCI [Disabled] This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed PCIe LAN cards. Configuration options: [Disabled] [Enabled] Power On By Ring [Disabled] [Disabled] [Enabled] Disables the Ring devices to generate a wake event. Enables the Ring devices to generate a wake event. Power On By RTC [Disabled] This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake event and configure the RTC alarm date. When enabled, you can set the days, hours, minutes, or seconds to schedule an RTC alarm date. Configuration options: [Disabled] [Enabled] 3-24 H310A-EM-A
![](/manual_guide/products/asus-h310aema-user-manual-english-9a7c95b/58.png)