Asus K8N-DRE User Guide - Page 41
VGA Graphics controller setting 3-pin VGA_EN1
UPC - 610839132164
View all Asus K8N-DRE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
6. BIOS Recovery (3-pin RECOVERY1) This jumper allows you to recover your original BIOS from a floppy disk in case the BIOS codes and data are corrupted. To recover the BIOS: 1.Turn OFF your computer and unplug the power cord. 2.Move the jumper cap from pins 1-2 (default) to pins 2-3. 3.Insert a floppy disk with the original or updated BIOS file. 4.Plug the power cord and turn ON the computer. 5.The system searches for the BIOS file in the floppy then reflashes the BIOS. 6.When finished, shut down your computer. 7.Replace the jumper cap from pins 2-3 to pins 1-2. 8.Reboot your computer. 9.Hold down the key during the boot process and enter BIOS setup to re-enter data. K8N-DRE ® RECOVERY1 1 2 Normal (Default) 2 3 BIOS recovery K8N-DRE BIOS recovery setting 7 . VGA Graphics controller setting (3-pin VGA_EN1) These jumpers allow you to enable or disable the onboard ATI Rage XL video graphics controller. Set to pins 1-2 to enable the video graphics controller. K8N-DRE ® K8N-DRE VGA setting ASUS K8N-DRE VGA_EN1 1 2 Enable (Default) 2 3 Disable 2-21