Asus K8N K8N User's manual for English Version E1868 - Page 52
DRAM RAS PRECHANGE Time [Auto]
View all Asus K8N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
DRAM RAS PRECHANGE Time [Auto] Sets the DRAM RAS PRECHANGE Time. Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK] [6 CLK] DRAM ACTIVE TIME [Auto] Sets the DRAM ACTIVE TIME. Configuration options: [Auto] [5 CLK] [6 CLK] [7 CLK] [8 CLK] [9 CLK] [10 CLK] [11 CLK] [12 CLK] [13 CLK] [14 CLK] [15 CLK] 1T/2T Timing [Auto] Sets the DRAM command timing. When set to Auto, the DRAM timing is set to 2T if the CPU installed can support 2T timing. Configuration options: [1T] [Auto] Master ECC Enable [Disabled] Enables or disables support on all nodes for ECC error detect and correction. Configuration options: [Disabled] [Enabled] Audio CODEC Interface [Auto] Allows you to set the onboard audio CODEC interface. [Auto] allows the BIOS to detect whether you are using any audio device. Configuration options: [Enabled] [Disabled] [Auto] Primary Video [PCI] Switches the PCI Bus scanning order while searching for a video card. This allows you to select the type of Primary VGA in case of multiple video controllers. Configuration options: [PCI] [AGP] Aperture Size [ 128 MB] Allows you to select the size of mapped memory for AGP graphic data. Configuration options: [32 MB] [64 MB] [128 MB] [256 MB] [512 MB] AGP FW Enable [Auto] Disables or sets to automatic the AGP Fast Write feature. Configuration options: [Auto] [Disabled] AGP Sideband Address [Auto] Disables or sets to automatic the AGP Sideband address. Configuration options: [Auto] [Disabled] 2-18 Chapter 2: BIOS Setup