Asus K8N K8N User's manual for English Version E1868 - Page 54
USB Controller Support [USB 1.1+USB 2.0]
View all Asus K8N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Secondary Slave as RAID [Disabled] Enables or disables the use of the Secondary IDE Slave as RAID. Configuration options: [Disabled] [Enabled] Third Master as RAID [Disabled] Enables or disables the use of the Third IDE Master as RAID. Configuration options: [Disabled] [Enabled] Fourth Master as RAID [Disabled] Enables or disables the use of the Fourth IDE Master as RAID. Configuration options: [Disabled] [Enabled] USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. USB Configuration Module Version - 2.23.2-7.4 USB Devices Enabled: None USB Controller Support Legacy USB Support USB 2.0 Controller Mode [USB 1.1+USB 2.0] [Auto] [HiSpeed] Enables USB host controllers. The Module Version and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None. USB Controller Support [USB 1.1+USB 2.0] Allows you to disable or set the USB controller support type. Configuration options: [Disabled] [USB 1.1 only] [USB 1.1+USB 2.0] Legacy USB Support [Auto] Allows you to enable or disable support for legacy USB devices. Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto] USB 2.0 Controller Mode [HiSpeed] Allows you to configure the USB 2.0 controller in HiSpeed (480 Mbps) or Full Speed (12 Mbps). Configuration options: [HiSpeed ] [Full Speed] 2-20 Chapter 2: BIOS Setup