Asus K8N4-E SE K8N4-E SE User's Manual for English Edition - Page 77

2.5.4 Hardware Monitor The items in this sub-menu displays the hardware monitor values automatically detected by the BIOS. It also allows you to change CPU Q-Fan feature-related parameters. Select an item then press to display the configuration options. Phoenix-Award BIOS CMOS Setup Utility Power Hardware Monitor Q-Fan Controller Vcore Voltage 3.3V Voltage 5V Voltage 12V Voltage [Disabled] 1.56V 3.18V 5.05V 11.58V Select Menu Item Specific Help Press [Enter] to enable or disable CPU Temperature M/B Temperature CPU FAN Speed Chassis Fan Speed CHIP FAN Speed x CPU Target Temperature CPU Fan Speed warning Chassis Fan Speed warning CHIP Fan Speed warning 48ºC 41ºC 3068 RPM 0 RPM 7758 RPM 72ºC [1200 RPM] [Disabled] [Enabled] F1:Help ESC: Exit ↑↓ : Select Item →←: Select Menu -/+: Change Value Enter: Select Sub-menu F5: Setup Defaults F10: Save and Exit Q-Fan Controller [Disabled] Allows you to enable or disable the Q-Fan controller. Configuration options: [Disabled] [Enabled] Vcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators. These items are not user-configurable. CPU Temperature, M/B Temperature The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. These items are not user-configurable. CPU Fan Speed [xxxxRPM] Chassis Fan Speed [xxxxRPM] CHIP Fan Speed [xxxxRPM] The onboard hardware monitor automatically detects and displays the CPU, Chassis, and chip fan speeds in rotations per minute (RPM). If any of the fans is not connected to the motherboard, the field shows 0. These items are not user-configurable. ASUS K8N4-E SE 2-33