Asus KFN5-D User Guide - Page 88
Enable Clock to All DIMMs [Disabled]
![]() |
UPC - 610839140275
View all Asus KFN5-D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Memclock Mode [Auto] Sets the memory clock mode. Configuration options: [Auto] [Limit] [Manual] The following item appears when the Memclock Mode is set to Limit or Manual. Memclock Value [200 MHz] Sets the memory clock mode limit. Configuration options: [200 MHz] [266 MHz] [333 MHz] MCT Timing Mode [Auto] Sets the MCT Timing Mode. Configuration options: [Auto] [Limit] Bank Interleaving [Auto] Allows you to enable the bank memory interleaving. Configuration options: [Disabled] [Auto] Enable Clock to All DIMMs [Disabled] Configuration options: [Disabled] [Enabled] DQS Signal Training Control [Enabled] Enables or disables the DQS Signal Timing Training control. Configuration options: [Disabled] [Enabled] MemClk Tristate C3/ALTVID [Disabled] Configuration options: [Disabled] [Enabled] CS Sparing Enable [Disabled] Configuration options: [Disabled] [Enabled] Memoryy Hole Remapping [Enabled] Enables or disables the memory remapping around memory hole. Configuration options: [Disabled] [Enabled] 4-22 Chapter 4: BIOS setup
![](/manual_guide/products/asus-kfn5d-user-guide-041d0d8/88.png)