Asus KGPX-D24 User Guide - Page 22
Press the load lever with your, B until it is released from the, and then fit the socket alignment
View all Asus KGPX-D24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
2. Press the load lever with your thumb (A), then move it to the left (B) until it is released from the retention tab. Retention tab A To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. B Load lever 3. Lift the load lever in the direction of the arrow to a 135º angle. 4. Lift the load plate with your thumb and forefinger to a 100º angle. 5. Remove the PnP cap from the CPU socket. Load plate 4 5 PnP cap 3 6. Position the CPU over the socket, ensuring that the gold triangle is on the bottom‑right corner of the socket, and then fit the socket alignment key into the CPU notch. The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU! Gold triangle mark Alignment keys 2-4 Chapter 2: Hardware setup