Asus M2A-MX User Manual - Page 43
CPU and Chassis Fan connectors 4-pin CPU_FAN, 3-pin CHA_FAN, Digital audio connector 4-1 pin - m2a motherboard audio
View all Asus M2A-MX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
5. CPU and Chassis Fan connectors (4-pin CPU_FAN, 3-pin CHA_FAN) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors. Only CPU Fan supports Q-Fan. CPU_FAN GND CPU FAN PWR CPU FAN IN CPU FAN PWM R M2A-MX CHA_FAN Rotation +12V GND M2A-MX Fan Connectors 6. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF module cable to this connector, then install the module to a slot opening at the back of the system chassis. R M2A-MX M2A-MX Digital Audio Connector The S/PDIF module is purchased separately. ASUS M2A-MX 1-31