Asus M2A-MX User Manual - Page 47
System power LED 2-pin PWRLED
View all Asus M2A-MX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
12. System panel connector (10-1 pin PANEL) This connector supports several chassis-mounted functions. PLED PWRSW PLED+ PLEDPWR GND R M2A-MX F_PANEL IDELED+ IDELED- Ground Reset +HDLED RESET M2A-MX System Panel Connector • System power LED (2-pin PWRLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. • Hard disk drive activity LED (2-pin +HDLED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD. • AXT Power/Soft-off button (2-pin PWRBTN) This connector is for the system power button. Pressing the power button turns the system ON or puts the system in SLEEP or SOFT-OFF mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS M2A-MX 1-35