Asus M2N68 PLUS User Manual - Page 29
Serial ATA connectors 7-pin SATA1, SATA2, SATA3, SATA4
View all Asus M2N68 PLUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4) These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA 1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the standard parallel ATA with 133 MB/s (Ultra DMA133). If you install Serial ATA hard disk drives, you can create a RAID 0, RAID 1, RAID 0+1, RAID 5, and JBOD configurations through the onboard controller. Install the Windows® XP Service Pack 1 before using Serial ATA. • For detailed instructions on how to configure RAID 0, RAID 1, and RAID 0+1, RAID 5, and JBOD, refer to the RAID manual in the support DVD. • If you intend to create a Serial ATA RAID set using these connectors, set the nVidia RAID Function item in the BIOS to [Enabled]. See page 2-7 for details. Chapter 1: Product introduction 1-19