Asus M2V-X Motherboard Installation Guide - Page 109
Create Array, RAID 0 for performance
![]() |
View all Asus M2V-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Create Array 1. From the VIA RAID BIOS utility main menu, select Create Array then press . The main menu items on the upper-left corner of the screen are replaced with create array menu options. VIA Tech. RAID BIOS Ver 1.xx Auto Setup For Data Security Array Mode RAID 1 (Mirroring) Select Disk Drives Start Create Process Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/Disk Status ↑,↓ : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status Serial_Ch0 Master XXXXXXXXXXX ARRAY 0 SATA 999.99 XXXXXXX Serial_Ch1 Master XXXXXXXXXXX ARRAY 0 SATA 999.99 XXXXXXX RAID 0 for performance 1. From the create array menu, select Array Mode, then press . The supported RAID configurations appear on a pop-up menu. RAID 0 for performance RAID 1 for data protection RAID 0/1 RAID SPAN for capacity 2. Select RAID 0 for performance then press . From this point, you may choose to auto-configure the RAID array by selecting Auto Setup for Performance or manually configure the RAID array for stripped sets. If you want to auto-configure, proceed to the next step, otherwise, skip to step 5. 3. Select Auto Setup for Performance and press . The following confirmation message appears. Auto create array will destroy all data on disks, Continue? (Y/N) ASUS M2V-X 5-13
![](/manual_guide/products/asus-m2vx-motherboard-installation-guide-9509c95/109.png)