Asus M2V-X Motherboard Installation Guide - Page 72
FSB Frequency [200], PLL1 Spread Spectrum [Enabled], DDR Voltage [1.90V], USB 2.0 Ports Enable [
![]() |
View all Asus M2V-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
The following item appears only when the AI Overclocking item is set to [Manual]. FSB Frequency [200] The valid input value is from 200 to 400. PLL1 Spread Spectrum [Enabled] Allows you to enable or disable the PLL1 Spread Spectrum. Configuration options: [Enabled] [Disabled] DDR Voltage [1.90V] Sets the DDR Voltage. Configuration options: [1.80V] [1.85V] [1.90V] [1.95V] 4.4.2 USB Configuration The items in this menu allows you to change the USB-related features. Select an item then press to display the configuration options. USB Configuration Module Version - 2.24.0-11.4 USB Devices Enabled: None USB 1.1 Ports Configuration [Enable] USB 2.0 Ports Enable [Enable] Legacy USB Support [Enable] Port 64/60 Emulation [Disabled] USB 2.0 Controller Mode [HiSpeed] BIOS EHCI Hand-Off [Enabled] The Module Version and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None. USB 1.1 Ports Configuration [Enable] Allows you to configure the USB 1.1 ports. Configuration options: [Disabled] [Enable] USB 2.0 Ports Enable [Enable] Allows you to enable or disable the USB 2.0 ports. Configuration options: [Disabled] [Enable] 4-16 Chapter 4: BIOS Setup
![](/manual_guide/products/asus-m2vx-motherboard-installation-guide-9509c95/72.png)