Asus M2V-X Motherboard Installation Guide - Page 46
CPU, Power and Chassis Fan Connectors, pin CPU_FAN, 3-pin CHA_FAN - m2v windows xp
View all Asus M2V-X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Important notes on Serial ATA solution The Serial ATA cable is smaller and more flexible, allowing easier routing inside the chassis. The lower pin count of the Serial ATA cable eliminates the problem caused by the wide, flat ribbon cables of the Parallel ATA interface. • Hot plug support for Serial ATA drive and connections is not available on this motherboard. • Install Windows® XP Service Pack 1 or later versions when using Serial ATA drives. 4. CPU, Power and Chassis Fan Connectors (4-pin CPU_FAN, 3-pin CHA_FAN) The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector. Do not forget to connect the fan cables to the fan connectors. Lack of sufficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! CPU_FAN GND CPU FAN PWR CPU FAN IN CPU FAN PWM M2V-X M2V-X Fan Connectors CHA_FAN GND +12V Rotation 2-24 Chapter 2: Hardware information