Asus M3A32-MVP DELUXE User Manual - Page 57
Marvell, Serial ATA RAID connector 7-pin SATA_RAID1/2 - no post
View all Asus M3A32-MVP DELUXE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
4. Marvell® 6121 Serial ATA RAID connector (7-pin SATA_RAID1/2) This connector is for a Serial ATA signal cable that supports a Serial ATA hard disk drive. To configure RAID 0 or RAID 1, install two internal Serial ATA hard disk drives to the SATA_RAID1/2 connectors. The Marvell IDE/RAID function item in BIOS is set to [IDE] by default. Setting this item to [RAID] allows you to use the connectors to build a RAID set. See section 4.4.5 Onboard Devices Configuration for details. M3A32-MVP DELUXE GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 GND GND RSATA_RXN2 RSATA_RXP2 GND RSATA_TXN2 RSATA_TXP2 GND ® SATA_RAID1 SATA_RAID2 M3A32-MVP DELUXE SATA RAID connectors Before creating a RAID set using Serial ATA hard disks, make sure that you have connected the Serial ATA signal cables and installed Serial ATA hard disk drives; otherwise, you cannot enter the Marvell RAID BIOS Configuration utility and SATA BIOS setup during POST. ASUS M3A32-MVP Deluxe Series 2-31