Asus M3A78-T User Manual - Page 92

4.4.6 Onboard Devices Configuration Advanced Onboard Devices Configuraiton Serial Port1 Address [3F8/IRQ4] HD Audio Azalia Device [Auto] Front Panel Support Type [HD Audio] SPDIF_OUT Mode Setting [SPDIF Output] Onboard 1394 [Enabled] Onboard Marvell Lan [Enabled] Onboard Marvell LAN Boot ROM [Disabled] Primary Display Adapter [PCI-E] Allows BIOS to Select Serial Port1 Base Addresses. Serial Port1 Address [3F8/IRQ4] Allows you to select the Serial Port1 base address. Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3] HD Audio Azalia Device [Auto] Allows you to enable or disable the High Definition Audio. The following item appears only when you set this item to [Auto]. Configuration options: [Auto] [Disabled] Front Panel Support Type [HD Audio] Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or high-definition audio depending on the audio standard that the front panel audio module supports. Configuration options: [AC97] [HD Audio] SPDIF_OUT Mode Setting [SPDIF Output] If your graphics card has HDMI output and needs to use SPDIF signal from the SPDIF_Out header, you need to set to HDMI output for HDMI audio output. Configuration options: [SPDIF Output] [HDMI Output] Onboard 1394 [Enabled] Allows you to enable or disable the onboard 1394 device support. Configuration options: �[D��is�a��b�le��d�]�[�E�n�a��b�le��d�] Onboard Marvell LAN [Enabled] Configuration options: [Enable] [Disabled] Onboard Marvell LAN Boot ROM [Disabled] This item appears only when you enable the previous item. Configuration options: [Enable] [Disabled] Primary Display Adapter [PCI-E] Allows you to select which graphics controller to use as the primary boot device. Configuration options: [PCI-E] [PCI] [Onboard] 4-28 Chapter 4: BIOS setup