Asus NCLV-DS2 User Manual - Page 33
Repeat steps 1 to 3 to install
View all Asus NCLV-DS2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2. Use a Phillips screwdriver to tighten the four heatsink screws in a diagonal sequence. 3. Connect the fan cable to the 4-pin connector labeled CPU_FAN1. Do not forget to connect the CPU fan connector! Hardware monitoring errors may occur if you fail to plug this connector. 4. Repeat steps 1 to 3 to install the other heatsink if you have installed a second CPU, then connect the fan cable to the 4-pin connector labeled CPU_FAN2. The heatsinks appear as shown when installed. CPU_FAN2 connector ASUS NCLV-D2 Series CPU_FAN1 connector 2-13
ASUS NCLV-D2 Series
ASUS NCLV-D2 Series
ASUS NCLV-D2 Series
ASUS NCLV-D2 Series
ASUS NCLV-D2 Series
2-13
2-13
2-13
2-13
2-13
Do not forget to connect the
CPU fan connector! Hardware
monitoring errors may occur if
you fail to plug this connector.
2.
Use a Phillips screwdriver to
tighten the four heatsink screws
in a diagonal sequence.
3.
Connect the fan cable to the
4-pin connector labeled
CPU_FAN1.
4.
Repeat steps 1 to 3 to install
the other heatsink if you have
installed a second CPU, then
connect the fan cable to the
4-pin connector labeled
CPU_FAN2.
The heatsinks appear as shown
when installed.
CPU_FAN2 connector
CPU_FAN2 connector
CPU_FAN2 connector
CPU_FAN2 connector
CPU_FAN2 connector
CPU_FAN1
CPU_FAN1
CPU_FAN1
CPU_FAN1
CPU_FAN1
connector
connector
connector
connector
connector