Asus P2B-DS P2B-DS User Manual - Page 67
Viii. Adaptec Ez-scsi
View all Asus P2B-DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
VIII. EZ-SCSI UTILITY Intro/Quick Start VIII. ADAPTEC EZ-SCSI Welcome to Adaptec EZSCSIVI, ADAPTEC EZ-SCSI UTILITY 4.03. Adaptec EZSCSI gives you what you need to use DOS, Windows®3.1x, or Windows for Workgroups3.1x. Note: TheADAPTEC EZ-SCSI UTILITY does not provide drivers for Windows®95 and WindowsNT™. Quick Start Instructions First, install SCSI devices (see the hardware documentation for details). Then follow the instructions for your operating system software in one of the following sections. We recommend that after you install Adaptec EZSCSI, you run SCSITutor to learn more about the features of SCSI. Windows95 or WindowsNT If you want to install Windows95 or WindowsNT on a new computer system, you may not be able to access your SCSI CDROM drive at first. (Usually, you install Windows95 and WindowsNT from a CDROM disc.) To gain access to your CDROM drive, follow the DOS Quick Start instructions. Windows/Windows for Workgroups 3.1x 1 Install Windows 3.1x or Windows for Workgroups 3.1x and start it running on your computer. 2 Insert the Adaptec EZSCSI Setup Disk into your floppy disk drive. 3 Select File/Run from the Program Manager menu. 4 When the Run dialog box appears, type a:\setup if you are using the A drive or b:\setup if you are using the B drive. Then click OK. 5 Follow the onscreen instructions. DOS 1 Install DOS 6.x or later and start it running on your computer. 2 Insert the Adaptec EZSCSI Setup Disk into your floppy disk drive. 3 At the DOS prompt, type a:\install (assuming your 3.5" floppy is A: drive). Then press . 4 Follow the onscreen instructions. ASUS P2B-D/P2B-DS User's Manual 67