Asus P4BGL-VM P4BGL-VM User Manual - Page 80

SDRAM RAS Precharge Delay [3T] This item controls the idle clocks after issuing a precharge command to the DDR SDRAM. Configuration options: [3T] [2T] SDRAM Active Precharge Delay [5T] This item controls the number of DDR SDRAM clocks used for DDR SDRAM parameters. Configuration options: [8T] [7T] [6T] [5T] SDRAM Idle Timer [Infinite] Configuration options: [Infinite] [0T] [8T] [16T] [64T] Onboard VGA Shared Memory Size [1MB] This field allows you to enable or disable the onboard VGA feature. Set to [Enabled] if you wish to use the onboard VGA. Set to [Disabled] if you installed an AGP device. If you did not install an external AGP device into the AGP slot, BIOS will enable the onboard VGA regardless of the setting of this field. Configuration options: [1MB] [8MB] NTSC/PAL Preference [NTSC] This item allows you to select the video standard. Configuration options: [NTSC] [PAL] Synchronous Display [Enabled] This item allows you to enable or disable the synchronous display feature. Configuration options: [Disabled] [Enabled] Display Device Priority [CRT, Flat Panel, TV Out] This item allows you to select the order of the display device priority. Configuration options: [CRT, Flat Panel, TV Out] [Flat Panel, CRT, TV Out] [CRT, TV Out, Flat Panel] [TV Out, CRT, Flat Panel] [Flat Panel, TV Out, CRT] [TV Out, Flat Panel, CRT] Graphics Aperture Size [128MB] This feature allows you to select the size of mapped memory for AGP graphic data. Configuration options: [128MB] [256MB] 4-20 Chapter 4: BIOS Setup