Asus P5BV Motherboard Installation Guide - Page 146
Creating a RAID/SATA driver disk
UPC - 610839159055
View all Asus P5BV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
5.5 Creating a RAID/SATA driver disk A floppy disk with the RAID driver is required when installing Windows® 2000/XP operating system on a hard disk drive that is included in a RAID set. 5.5.1 Creating a RAID/SATA driver disk without entering the OS To create a RAID/SATA driver disk without entering the OS: 1. Boot your computer. 2. Press during POST to enter the BIOS setup utility. 3. Set the optical drive as the primary boot device. 4. Insert the support CD into the optical drive. 5. Save changes and exit BIOS. 6. Press any key when the system prompts "Press any key to boot from the optical drive." 7. When the menu appears, press to create a RAID driver disk. 8. Insert a formatted floppy disk into the floppy drive then press . 9. Follow succeeding screen instructions to complete the process. 5.5.2 Creating a RAID/SATA driver disk in Windows® To create a RAID/SATA driver disk in Windows®: 1. Start Windows®. 2. Place the motherboard support CD into the optical drive. 3. When the Drivers menu appears, click JMicron JMB363 Driver Disk to create a JMicron RAID driver disk. 4. Insert a floppy disk into the floppy disk drive. 5. Follow succeeding screen instructions to complete the process. Write-protect the floppy disk to avoid computer virus infection. To install the RAID driver: 1. During the OS installation, the system prompts you to press the F6 key to install third-party SCSI or RAID driver. 2. Press then insert the floppy disk with RAID driver into the floppy disk drive. 3. Follow the succeeding screen instructions to complete the installation. 5-40 Chapter 5: Software support