Asus P5G41T-M LX3 User Manual - Page 23

Memory configurations - overclock

Page 23 highlights

1.7.2 Memory configurations You may install 512MB, 1GB, 2GB, and 4GB unbuffered non‑ECC DDR3 DIMMs into the DIMM sockets. • You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation. • Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. • Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do any of the following: - Use a maximum of 3GB system memory if you are using a 32-bit Windows® OS. - Install a 64-bit Windows® OS when you want to install 4GB or more memory on the motherboard. • This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or less. • The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. • For system stability, use a more efficient cooling system to support a full memory load (2 DIMMs) or overclocking conditions. P5G41T-M LX3 Motherboard Qualified Vendors Lists (QVL) DDR3-1066 MHz capability Vendor Part No. Size SS/ Chip DS Brand Chip NO. Crucial Crucial ELPIDA CT12864BA1067.8FF CT25664BA1067.16FF EBJ10UE8EDF0-AE-F 1GB SS Micron 9GF22D9KPT 2GB DS Micron 9HF22D9KPT 1GB SS ELPIDA J1108EDSE-DJ-F ELPIDA ELPIDA EBJ11UD8BAFA-AE-E EBJ21UE8EDF0-AE-F 1GB DS Elpida J5308BASE-AC-E 2GB DS ELPIDA J1108EDSE-DJ-F KINGSTON KINGSTON KINGSTON Micron Micron OCZ KVR1066D3N7/1G KVR1066D3N7/2G KVR1066D3N7/4G MT8JTF12864AZ-1G1F1 MT16JTF25664AZ-1G1F1 OCZ3G1066LV4GK 1GB 2GB 4GB 1GB 2GB 4GB(2x2GB) SS KTC DS ELPIDA DS Hynix SS Micron DS Micron DS Micron D1288JPNDPLD9U J1108BDSE-DJ-F H5TQ2G83AFR 9GF22D9KPT 9HF22D9KPT 9BF27D9KPV Timing 7 7 - - 7 7 7 7 7 7-7-7-20 Voltage 1.35V(low voltage) 1.35V(low voltage) 1.5V 1.5V 1.5V 1.65V DIMM socket support (Optional) A* B* • • • • • • • • • • • • • • • • • • • • • • ASUS P5G41T-M LX3 1-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

ASUS P5G41T-M LX3
1-13
1.7.2
Memory configurations
You may install 512MB, 1GB, 2GB, and 4GB unbuffered non-ECC DDR3 DIMMs into the
DIMM sockets.
You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
Always install DIMMs with the same CAS latency. For optimum compatibility, it is
recommended that you obtain memory modules from the same vendor.
Due to the memory address limitation on 32-bit Windows
®
OS, when you install 4GB
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
-
Use a maximum of 3GB system memory if you are using a 32-bit Windows
®
OS.
-
Install a 64-bit Windows
®
OS when you want to install 4GB or more memory on
the motherboard.
This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or less.
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a lower
frequency than the vendor-marked value.
For system stability, use a more efficient cooling system to support a full memory load (2
DIMMs) or overclocking conditions.
P5G41T-M LX3 Motherboard Qualified Vendors Lists (QVL)
DDR3-1066 MHz capability
Vendor
Part No.
Size
SS/
DS
Chip
Brand
Chip NO.
Timing
Voltage
DIMM socket
support
(Optional)
A*
B*
Crucial
CT12864BA1067.8FF
1GB
SS
Micron
9GF22D9KPT
7
-
Crucial
CT25664BA1067.16FF
2GB
DS
Micron
9HF22D9KPT
7
-
ELPIDA
EBJ10UE8EDF0-AE-F
1GB
SS
ELPIDA
J1108EDSE-DJ-F
-
1.35V(low
voltage)
ELPIDA
EBJ11UD8BAFA-AE-E
1GB
DS
Elpida
J5308BASE-AC-E
-
-
ELPIDA
EBJ21UE8EDF0-AE-F
2GB
DS
ELPIDA
J1108EDSE-DJ-F
-
1.35V(low
voltage)
KINGSTON
KVR1066D3N7/1G
1GB
SS
KTC
D1288JPNDPLD9U
7
1.5V
KINGSTON
KVR1066D3N7/2G
2GB
DS
ELPIDA
J1108BDSE-DJ-F
7
1.5V
KINGSTON
KVR1066D3N7/4G
4GB
DS
Hynix
H5TQ2G83AFR
7
1.5V
Micron
MT8JTF12864AZ-1G1F1
1GB
SS
Micron
9GF22D9KPT
7
-
Micron
MT16JTF25664AZ-1G1F1
2GB
DS
Micron
9HF22D9KPT
7
-
OCZ
OCZ3G1066LV4GK
4GB(2x2GB)
DS
Micron
9BF27D9KPV
7-7-7-20
1.65V