Asus P5GC-MR User Guide - Page 77
Boot Graphic Adapter Priority [PCI Express/Int-VGA]
View all Asus P5GC-MR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
DRAM RAS# Precharge [6 DRAM Clocks] Controls the idle clocks after issuing a precharge command to the DDR SDRAM. Configuration options: [3 DRAM Clocks] [4 DRAM Clocks] [5 DRAM Clocks] [6 DRAM Clocks] DRAM RAS# Activate to Precharge Delay [15 DRAM Clocks] Configuration options: [9 DRAM Clocks] [10 DRAM Clocks] ~ [15 DRAM Clocks] DRAM Write Recovery Time [4 clocks] Configuration options: [2 Clocks] [3 Clocks] [4 Clocks] [5 Clocks] [6 Clocks] Hyper Path 3 [Auto] Sets this item to enabled to reduce bottlenecks of memory bandwidth. Sets it to disabled for safe mode. Configuration options: [Disabled] [Enabled] [Auto] DRAM Throttling Threshold [Auto] Allows you to enable DRAM Thermal Throttling to make your system more stable. Configuration options: [Disabled] [Auto] Boot Graphic Adapter Priority [PCI Express/Int-VGA] Allows selection of the graphics controller to use as primary boot device. Configuration options: [Internal VGA] [PCI Express/Int-VGA] [PCI Express/PCI] [PCI/PCI Express] [PCI/Int-VGA] Internal Graphics Mode Select [Enabled, 8MB] Sets the internal graphics mode. Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB] Graphics memory type [Auto] Sets the graphics memory type. Configuration options: [Auto] [DVMT] [DVMT+FIX] DVMT/DVMT+FIX Memory [56MB] Configuration options: [56MB] [120MB] [216] PEG Buffer Length [Auto] Sets PCIEX graphics card buffer length. Configuration options: [Auto] [Long] [Short] Link Latency [Auto] Sets link latency. Configuration options: [Auto] [Slow] [Normal] PEG Root Control [Auto] Enables, disables or set to Auto of the link latency. Configuration options: [Auto] [Disabled] [Enabled] ASUS P5GC-MR 4-23