Asus P5GD1 P5GD1 User's Manual English Version E1673 - Page 74
IDE Detect Time Out [35], ALPE and ASP [Disabled]
View all Asus P5GD1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Enhanced Mode Support On [S-ATA mode] The default setting S-ATA allows you to use native OS on Serial ATA and Parallel ATA ports. We recommend that you do not change the default setting for better OS compatibility. In this setting, you may use legacy OS on the Parallel ATA ports o n l y i f you did not install any Serial ATA device. The P-ATA+S-ATA and P-ATA options are for advanced users only. If you set to any of these options and encounter problems, revert to the default setting S - A T A. Configuration options: [P-ATA+S-ATA] [S-ATA mode] [P-ATA] The O n b o a r d I D E O p e r a t e M o d e and its submenu items appear only when the C o n f i g u r e S A T A A s item is set to Standard IDE. Onboard Serial-ATA BOOTROOM [Disabled] Enables or disables the onboard Serial ATA boot ROM. This item appears only when the Configure SATA As item is set as RAID. Configuration options: [Disabled] [Enabled] The O n b o a r d S e r i a l - A T A B O O T R O M item appears only when the C o n f i g u r e S A T A A s item is set to RAID mode. ALPE and ASP [Disabled] Enables or disables the ALPE and ASP. This item appears only when the Configure SATA As item is set as AHCI. Configuration options: [Disabled] [Enabled] Stagger Spinup Support [Disabled] Enables or disables the stagger spinup support. Configuration options: [Disabled] [Enabled] AHCI Port 3 Interlock Switch [Disabled] Enables or disables the Advanced Host Controller Interface (AHCI) Port 3 interlock switch. Configuration options: [Disabled] [Enabled] The A L P E a n d A S P item appears only when the C o n f i g u r e S A T A A s item is set to AHCI or RAID Mode. IDE Detect Time Out [35] Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35] 4-16 Chapter 4: BIOS setup