Asus P5P41T USB3 User Manual - Page 49
Memory Voltage [Auto], NB Voltage [Auto], VTT Voltage [Auto], CPU Over Voltage [Auto], SB 1.5V
View all Asus P5P41T USB3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
The following table shows the DRAM Frequency options that appear when the FSB value is 1333, 1066, and 800. FSB 1333 1066 800 Auto v v v 800MHz v v v 960MHz DRAM Frequency 1000MHz 1067MHz v v 1100MHz 1333MHz v Selecting a very high DRAM frequency may cause the system to become unstable! If this happens, revert to the default setting. Memory Voltage [Auto] Allows you to adjust Memory Over voltage and each step is 10mV. NB Voltage [Auto] Allows you to set the Northbridge voltage. The values range from 1.12500V to 1.51875V with a 0.00625V increment. Key in the value directly or use +/- to adjust the voltage. Configuration options: [Auto] VTT Voltage [Auto] Allows you to set the VTT voltage. The values range from 1.20000V to 1.59375V with a 0.00625V increment. Key in the value directly or use +/- to adjust the voltage. Configuration options: [Auto] CPU Over Voltage [Auto] Allows you to set the CPU over voltage. The values range from 0.0100V to 0.6300V with a 0.0100V increment. Key in the value directly or use +/- to adjust the voltage. Configuration options: [Auto] SB 1.5V Voltage [1.5V] Allows you to select the South Bridge voltage. Configuration options: [1.5V] [1.6V] Auto PSI [Enabled] Allows you to enable or disable the Auto PSI mode. Configuration options: [Disabled] [Enabled] Start auto tuning Press [Enter] to start auto tuning. It takes around five minutes and the system will reboot for several times. After auto tuning, C-State is disabled. ASUS P5P41T/USB3 2-11