Home » Asus Manuals » Motherboards » Asus P7P55D-E HF » Manual Viewer

Asus P7P55D-E HF User Manual - Page 92

Chassis Fan 1 Speed [xxxxRPM] or [Ignored] / [N/A]

Add to My Manuals
Save this manual to your list of manuals

Page 92 highlights

[Ctrl-Esc] [Power Key] Allows you to turn on the system by pressing the Ctrl key and Esc key of the PS/2 keyboard. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. Allows you to turn on the system by pressing the Power key on the PS/2 keyboard. This feature requires an ATX power supply that provides at least 1A on the +5VSB lead. 3.7.7 Hardware Monitor BIOS SETUP UTILITY Power Hardware Monitor CPU Temperature(PECI) MB Temperature CPU Fan Speed CPU Q-Fan Control Chassis Fan 1 Speed Chassis Q-Fan Control Power Fan Speed CPU 3.3V 5V 12V Voltage Voltage Voltage Voltage [35ºC/95ºF] [34ºC/93ºF] [3590RPM] [Disabled] [N/A] [Disabled] [N/A] [ 1.040V] [ 3.008V] [ 4.776V] [11.648V] CPU Temperature (PECI) ←→ Select Screen ↑↓ Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit v02.61 (C)Copyright 1985-2009, American Megatrends, Inc. CPU Temperature(PECI) / MB Temperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignored if you do not wish to display the detected temperatures. CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A] Chassis Fan 1 Speed [xxxxRPM] or [Ignored] / [N/A] Power Fan Speed [xxxxRPM] or [Ignored] / [N/A] The onboard hardware monitor automatically detects and displays the CPU, chassis, and power fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A. Select Ignored if you do not wish to display the detected speed. CPU Q-Fan Control [Disabled] [Disabled] Disables the CPU Q-Fan control feature. [Enabled] Enables the CPU Q-Fan control feature. CPU Fan Profile [Standard] This item appears only when you enable the CPU Q-Fan Control feature and allows you to set the appropriate performance level of the CPU fan. [Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on the CPU temperature. [Silent] Sets to [Silent] to minimize the fan speed for quiet CPU fan operation. [Turbo] Sets to [Turbo] to achieve maximum CPU fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. Chapter 3 3-30 Chapter 3: BIOS setup

Section	Page
Contents	3
Notices	7
Safety information	8
About this guide	9
P7H55D-M EVO specifications summary	11
Chapter 1: Product introduction	15
1.1 Welcome!	15
1.2 Package contents	15
1.3 Special features	16
1.3.1 Product highlights	16
1.3.2 ASUS Exclusive Overclocking Features	17
1.3.3 ASUS Xtreme Phase	17
1.3.4 ASUS Exclusive Features	17
1.3.5 ASUS Quiet Thermal Solutions	18
1.3.6 ASUS EZ DIY	18
Chapter 2: Hardware information	19
2.1 Before you proceed	19
2.2 Motherboard overview	20
2.2.1 Motherboard layout	20
2.2.2 Layout contents	21
2.2.3 Placement direction	22
2.2.4 Screw holes	22
2.3 Central Processing Unit (CPU)	23
2.3.1 Installing the CPU	23
2.3.2 Installing the CPU heatsink and fan	26
2.3.3 Uninstalling the CPU heatsink and fan	27
2.4 System memory	28
2.4.1 Overview	28
2.4.2 Memory configurations	29
2.4.3 Installing a DIMM	41
2.4.4 Removing a DIMM	41
2.5 Expansion slots	42
2.5.1 Installing an expansion card	42
2.5.2 Configuring an expansion card	42
2.5.3 Interrupt assignments	43
2.5.4 PCI slot	44
2.5.5 PCI Express 2.0 x1 slots	44
2.5.6 PCI Express 2.0 x16 slot	44
2.6 Jumper	45
2.7 Onboard switch	46
2.8 Connectors	47
2.8.1 Rear panel connectors	47
2.8.2 Audio I/O connections	50
2.8.3 Internal connectors	52
2.8.4. ASUS Q-Connector (system panel)	60
2.9 Onboard LEDs	61
2.10 Starting up for the first time	62
2.11 Turning off the computer	62
Chapter 3: BIOS setup	63
3.1 Knowing BIOS	63
3.2 Updating BIOS	63
3.2.1 ASUS Update utility	64
3.2.2 ASUS EZ Flash 2 utility	66
3.2.3 ASUS CrashFree BIOS 3 utility	67
3.2.4 ASUS BIOS Updater	68
3.3 BIOS setup program	71
3.3.1 BIOS menu screen	71
3.3.2 Menu bar	71
3.3.3 Navigation keys	72
3.3.4 Menu items	72
3.3.5 Submenu items	72
3.3.6 Configuration fields	72
3.3.7 Pop-up window	72
3.3.8 Scroll bar	72
3.3.9 General help	72
3.4 Main menu	73
3.4.1 SATA 1–6	73
3.4.2 Storage Configuration	75
3.4.3 AHCI Configuration	76
3.4.4 System Information	76
3.5 Ai Tweaker menu	77
3.5.1 Ai Overclock Tuner [Auto]	77
3.5.2 CPU Ratio Setting [Auto]	78
3.5.3 Intel(R) SpeedStep(TM) Tech [Enabled]	78
3.5.4 Intel(R) TurboMode Tech [Enabled]	78
3.5.5 Xtreme Phase Full Power Mode [Auto]	79
3.5.6 BCLK Frequency [XXX]	79
3.5.7 PCIE Frequency [XXX]	79
3.5.8 DRAM Frequency [Auto]	79
3.5.9 QPI Frequency [Auto]	79
3.5.10 DRAM Timing Control	79
3.5.11 CPU Differential Amplitude [Auto]	81
3.5.12 CPU Clock Skew [Auto]	81
3.5.13 CPU Voltage Mode [Offset]	81
3.5.14 IMC Voltage [Auto]	81
3.5.15 DRAM Voltage [Auto]	81
3.5.16 CPU PLL Voltage [Auto]	82
3.5.17 PCH Voltage [Auto]	82
3.5.18 iGPU Voltage [Auto]	82
3.5.19 Load-Line Calibration [Auto]	82
3.5.20 CPU Spread Spectrum [Auto]	82
3.5.21 PCIE Spread Spectrum [Auto]	82
3.6 Advanced menu	83
3.6.1 CPU Configuration	83
3.6.2 Uncore Configuration	85
3.6.3 Onboard Devices Configuration	87
3.6.4 USB Configuration	88
3.6.5 PCIPnP	89
3.6.6 Intel VT-d [Disabled]	89
3.7 Power menu	90
3.7.1 Suspend Mode [Auto]	90
3.7.2 Repost Video on S3 Resume [No]	90
3.7.3 ACPI 2.0 Support [Disabled]	90
3.7.4 ACPI APIC Support [Enabled]	90
3.7.5 EuP Ready [Disabled]	90
3.7.6 APM Configuration	91
3.7.7 Hardware Monitor	92
3.8 Boot menu	94
3.8.1 Boot Device Priority	94
3.8.2 Boot Settings Configuration	95
3.8.3 Security	96
3.9 Tools menu	98
3.9.1 ASUS O.C. Profile	98
3.9.2 AI NET 2	99
3.9.3 ASUS EZ Flash 2	100
3.9.4 Express Gate [Auto]	100
3.10 Exit menu	101
Chapter 4: Software support	103
4.1 Installing an operating system	103
4.2 Support DVD information	103
4.2.1 Running the support DVD	103
4.2.2 Obtaining the software manuals	104
4.3 Software information	105
4.3.1 ASUS PC Probe II	105
4.3.2 ASUS AI Suite	106
4.3.3 ASUS Fan Xpert	107
4.3.4 ASUS TurboV	108
4.3.5 ASUS GPU Boost	109
4.3.6 ASUS Turbo Key	110
4.3.7 ASUS EPU	111
4.3.8 ASUS Express Gate	112

Match case Limit results 1 per page

3-30

Chapter 3: BIOS setup

Chapter 3

3.7.7

Hardware Monitor

CPU Temperature(PECI) / MB Temperature [xxxºC/xxxºF]

The onboard hardware monitor automatically detects and displays the CPU and motherboard

temperatures. Select

Ignored

if you do not wish to display the detected temperatures.

CPU Fan Speed [xxxxRPM] or [Ignored] / [N/A]

Chassis Fan 1 Speed [xxxxRPM] or [Ignored] / [N/A]

Power Fan Speed [xxxxRPM] or [Ignored] / [N/A]

The onboard hardware monitor automatically detects and displays the CPU, chassis, and

power fan speed in rotations per minute (RPM). If the fan is not connected to the motherboard,

the ﬁeld shows

N/A

. Select

Ignored

if you do not wish to display the detected speed.

CPU Q-Fan Control [Disabled]

[Disabled]

Disables the CPU Q-Fan control feature.

[Enabled]

Enables the CPU Q-Fan control feature.

CPU Fan Profile [Standard]

This item appears only when you enable the

CPU Q-Fan Control

feature and allows

you to set the appropriate performance level of the CPU fan.

[Standard]

Sets to [Standard] to make the CPU fan automatically adjust depending on

the CPU temperature.

[Silent]

Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.

[Turbo]

Sets to [Turbo] to achieve maximum CPU fan speed.

[Manual]

Sets to [Manual] to assign detailed fan speed control parameters.

BIOS SETUP UTILITY

Power

CPU Temperature (PECI)

←→

Select Screen

↑↓

Select Item

Enter Go to Sub Screen

General Help

F10

Save and Exit

ESC

Exit

Hardware Monitor

CPU Temperature(PECI)

[35ºC/95ºF]

MB Temperature

[34ºC/93ºF]

CPU Fan Speed

[3590RPM]

CPU Q-Fan Control

[Disabled]

Chassis Fan 1 Speed

[N/A]

Chassis Q-Fan Control

[Disabled]

Power Fan Speed

[N/A]

CPU

Voltage

[ 1.040V]

3.3V

Voltage

[ 3.008V]

Voltage

[ 4.776V]

12V

Voltage

[11.648V]

[Ctrl-Esc]

Allows you to turn on the system by pressing the Ctrl key and Esc key

of the PS/2 keyboard. This feature requires an ATX power supply that

provides at least 1A on the +5VSB lead.

[Power Key]

Allows you to turn on the system by pressing the Power key on the PS/2

keyboard. This feature requires an ATX power supply that provides at least

1A on the +5VSB lead.