Asus P7P55D PREMIUM User Manual - Page 53
Marvell, 88SE9123 Serial ATA 6.0 Gb/s connectors 7-pin SATA_6G_1/2 [gray] - windows 8
View all Asus P7P55D PREMIUM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
3. Marvell® 88SE9123 Serial ATA 6.0 Gb/s connectors (7-pin SATA_6G_1/2 [gray]) These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA 6.0 Gb/s hard disk drives. • These connectors are set to Standard IDE mode by default. In Standard IDE mode, you can connect Serial ATA boot/data hard disk drives to these connectors. • You must install Windows® XP Service Pack 2 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP2 or later versions. • When using hot-plug and NCQ, set the Marvell 9123 Controller item in the BIOS to [AHCI Mode]. Refer to section 3.6.3 Onboard Devices Configuration for details. Chapter 2 ASUS P7P55D Premium 2-33
ASUS P7P55D Premium
2-33
Chapter 2
3.
Marvell
®
88SE9123 Serial ATA 6.0 Gb/s connectors (7-pin SATA_6G_1/2 [gray])
These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA 6.0 Gb/s
hard disk drives.
•
These connectors are set to Standard IDE mode by default. In Standard IDE mode,
you can connect Serial ATA boot/data hard disk drives to these connectors.
•
You must install Windows
®
XP Service Pack 2 or later versions before using Serial
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows
®
XP SP2 or later versions.
•
When using hot-plug and NCQ, set the
Marvell 9123 Controller
item in the BIOS to
[AHCI Mode]. Refer to section
3.6.3 Onboard Devices Configuration
for details.