Asus P9D-MX User Guide - Page 48
Platform Enviromental Control Interface Setting 3-pin PECI1
![]() |
View all Asus P9D-MX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4. RAID configuration utility selection (3-pin RAID_SEL1) This jumper allows you to select the RAID configuration utility for creating disk arrays. Place the jumper caps over pins 1-2 if you want to use a ThirdParty Setup Utility (default). Otherwise, place the jumper caps to pins 2-3 to use the Intel® Rapid Storage Technology. 5. Platform Enviromental Control Interface Setting (3-pin PECI1)* When ASMB7-iKVM is installed, set to pins 2-3 for correct sensor information of the Platform Environmental Control Interface (PECI). Set to pins 1-2 if ASMB7-iKVM is not installed. *P9D-M and P9D-MV models only. 2-28 Chapter 2: Hardware information
![](/manual_guide/products/asus-p9dm-user-guide-6dcc26f/48.png)
2-28
Chapter 2: Hardware information
4.
RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility for creating
disk arrays. Place the jumper caps over pins 1–2 if you want to use a Third-
Party Setup Utility (default). Otherwise, place the jumper caps to pins 2–3 to
use the Intel
®
Rapid Storage Technology.
5.
Platform Enviromental Control Interface Setting (3-pin PECI1)*
When ASMB7-iKVM is installed, set to pins 2-3 for correct sensor information
of the Platform Environmental Control Interface
(
PECI). Set to pins 1-2 if
ASMB7-iKVM is not installed.
*P9D-M and P9D-MV models only.