Asus PCH DR User Guide - Page 40

Hardware information, Onboard VGA setting 3-pin VGA_EN1, Recovery setting 3-pin RECOVERY1

Get Asus PCH DR - Motherboard - Extended ATX PDF manuals and user guides
UPC - 610839118564
View all Asus PCH DR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

7. Recovery setting (3-pin RECOVERY1) This jumper allows you to update/recover the BIOS quickly. To update the BIOS: 1. Prepare a floppy disk that contains the latest BIOS for the motherboard (xxxx-xxx.BIN) and the AWDFLASH.EXE utility. 2. Set the jumper to pins 2-3. 3. Insert the floppy disk then turn on the system to update the BIOS. 4. Shut down the system. 5. Set the jumper back to pins 1-2. 6. Turn on the system. RECOVERY1 12 23 Normal (Default) PCH-DR PCH-DR BIOS Recovery Setting BIOS Recovery 8. Onboard VGA setting (3-pin VGA_EN1) This jumper allows you to enable or disable the onboard VGA. Set this jumper to disabled (pins 2-3) if you wish to install a VGA card. PCH-DR PCH-DR VGA Setting VGA_EN1 12 23 Enable (Default) Disable 2-22 Chapter 2: Hardware information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
2-22
Chapter 2: Hardware information
PCH-DR
PCH-DR VGA Setting
VGA_EN1
Enable
(Default)
Disable
23
12
8.
Onboard VGA setting (3-pin VGA_EN1)
This jumper allows you to enable or disable the onboard VGA. Set this
jumper to disabled (pins 2-3) if you wish to install a VGA card.
PCH-DR
PCH-DR BIOS Recovery Setting
RECOVERY1
(Default)
Normal
BIOS Recovery
12
23
7.
Recovery setting (3-pin RECOVERY1)
This jumper allows you to update/recover the BIOS quickly.
To update the BIOS:
1.
Prepare a floppy disk that contains the latest BIOS for the
motherboard (xxxx-xxx.BIN) and the AWDFLASH.EXE utility.
2.
Set the jumper to pins 2-3.
3.
Insert the floppy disk then turn on the system to update the BIOS.
4.
Shut down the system.
5.
Set the jumper back to pins 1-2.
6.
Turn on the system.