Asus PCH DR User Guide - Page 81
SATA Mode [IDE], Serial ATA Port0 Mode [SATA0 Master], Serial ATA Port1 Mode [SATA1 Master]
UPC - 610839118564
View all Asus PCH DR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
c. Setting to [Enhanced Mode] allows you to install parallel ATA and serial ATA devices at the same time, with a maximum of six IDE devices on each channel. Use ths option when you installed a native operating system like Windows 2000/XP. d. Setting to [SATA Only] allows you to install IDE devices on the Serial ATA channels only. e. Setting to [Disabled] disables the onboard SATA controller. The RAID feature is also disabled. For more information, refer to the "Parallel and Serial ATA hard disk configurations" on the next page. SATA Mode [IDE] When this item is set to [IDE], SATA operates in IDE mode. When set to [RAID], SATA operates in RAID mode. The RAID feature allows configuration of the installed IDE devices into a disk array. Configuration options: [IDE] [RAID] Serial ATA Port0 Mode [SATA0 Master] Serial ATA Port1 Mode [SATA1 Master] Allow you to set the SATA Port0 and Serial ATA Port1 modes. The options for these items vary depending on the setting of the On-Chip Serial ATA item. Configuration options: [Primary Master] [Primary Slave] [Secondary Master] [Secondary Slave] [SATA0 Master] [SATA1 Master] The configuration options for the items Serial ATA Port0 Mode and Serial ATA Port1 Mode vary depending on the On-chip Serial ATA and SATA Mode settings. ASUS PCH-DR motherboard 4-23