Asus PCI-DA2000 User Manual - Page 56

4. NetWare Driver Installation 5 Follow the instructions in the Netware User's Manual to install the server. 6 Run the NetWare v3.11 or v3.12 SERVER.EXE program to star the server. 7 At the system console prompt, use load command to load the ASUS PCI-DA2000 Series driver by typing load DA2000.DSK[Enter] 8 System console will display the following messages on the screen: Loading module DA2000.DSK ASUS PCI-DA2000 Disk Driver for NetWare v3.1x Version 1.11c November 3, 1995 Auto-loading module ASUSASPI.DSK ASUS ASPI Manager for NetWare v3.1x, v4.0x and v4.1 Version 1.11b October 27, 1995 Supported Slot values are 11 Slot: 11 The slot number (value) is auto-detected by ASUS PCI-DA2000 Series driver according to which PCI slot the ASUS PCI-DA2000 Series been plugged into. Write down the slot number for later using in STARTUP.NCF. 9 At this point, press [Enter]. If ASUS PCI-DA2000 Series driver installs successfully, the system console will display the following messages on the screen: PCI Bus # = 0, Device # = 9, Port = E400, IRQ = 10 ASUS Disk Driver Installed Successfully 10 Load the driver "DA2000.DSK" once for each installed ASUS PCI-DA2000. This driver supports up to four ASUS PCI-DA2000 Series Controller. 11 After each instance of the ASUS PCI-DA2000 Series driver has been loaded successfully, continue with the operations of Novell NetWare server described in NetWare User's Manual. Notes: The correct syntax in STARTUP.NCF file to load the ASUS PCI-DA2000 Series drivers is similar to the following: # load DA2000 slot = x x is the slot number of slot into which the ASUS PCI-DA2000 Series been plugged. The slot number is auto-detected by ASUS PCI-DA2000 Series driver and shown on the system console screen during ASUS PCI-DA2000 Series driver loading. 50 ASUS PCI-DA2000 Series RAID Controllers Driver Installation 4. NetWare Driver Install NetWare v3.1x