Asus PRIME H610M-E Users Manual English - Page 14
USB 2.0 headers, Addressable Gen 2 headers, Aura RGB header
View all Asus PRIME H610M-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
NUUUGNUUUGSSSCNSSSCNBBBBBBDD__+__+5PP5PP55V11V-+11-+ 9. USB 2.0 headers The USB 2.0 headers allow you to connect USB modules for additional PIN 1 USB 2.0 ports. The USB 2.0 headers provide data transfer speeds of up PIPNIN1 1 to 480 Mb/s. UUSSBB+5+5VV UUUUSSSSBBBB____GPPPPGN6161N4D-+4-+D +5V DC Data(negative) Data(positive) Groud DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the motherboard! The USB 2.0 module is purchased separately. 10. Addressable Gen 2 headers ADD_GEN 2 +5V Data Ground The Addressable Gen 2 headers allow you to connect individually addressable PIN 1 RGB WS2812B LED strips or WS2812B based LED strips. The Addressable Gen 2 headers support WS2812B addressable RGB LED strips (5V/Data/ Ground), with a maximum power rating of 3A (5V), and the addressable headers on this board can handle a combined maximum of 500 LEDs. Before you install or remove any component, ensure that the power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. • Actual lighting and color will vary with LED strip. • If your LED strip does not light up, check if the addressable RGB LED strip is connected in the correct orientation, and the 5V connector is aligned with the 5V header on the motherboard. • The addressable RGB LED strip will only light up when the system is powered on. • The addressable RGB LED strip is purchased separately. 11. Aura RGB header The Aura RGB header allows you to connect RGB LED strips. The Aura RGB header supports 5050 RGB multi-color LED strips (12V/G/R/B), with a maximum power rating of 3A (12V). Before you install or remove any component, ensure that the power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. • Actual lighting and color will vary with LED strip. • If your LED strip does not light up, check if the RGB LED extension cable and the RGB LED strip is connected in the correct orientation, and the 12V connector is aligned with the 12V header on the motherboard. • The LED strip will only light up when the system is powered on. • The LED strip is purchased separately. 1-4 Chapter 1: Product Introduction