Asus PRIME H610M-E Users Manual English - Page 16

16. Speaker header SPEAKER The Speaker header allows you to connect the chassis-mounted system PIN 1 warning speaker. The speaker allows you to hear system beeps and warnings. +5V GND GND Speaker Out 17. SPI TPM header This header supports a Trusted Platform Module (TPM) system with a Serial Peripheral Interface (SPI), allowing you to securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity. The SPI TPM module is purchased separately. TPM PIN 1 VCCSPI S_PLTRST# F2_SPI_CS1#_R +3V_SPI F_SPI_CS0#_R T_SPI_MISO F_SPI_HOLD#_R S_SPI_TPM_IRQ# S_SPI_TPM_CS2# TPM_DETECT_L GND T_SPI_CLK T_SPI_MOSI 18. System Panel header The System Panel header supports several chassis-mounted functions. • System Power LED header (+PWR_LED-) The 2-pin header allows you to connect the System Power LED. The System Power LED lights up when the system is connected to a power source, or when you turn on the system power, and blinks when the system is in sleep mode. PWR_LED+ PWR_LEDPWR GND F_PANEL +PWR_LED- PWR_BTN PIN 1 HDD_LED+ HDD_LED- Ground HWRST# (NC) • Storage Device Activity LED header (+HDD_LED-) The 2-pin header allows you to connect the Storage Device Activity +HDD_LED- RESET LED. The Storage Device Activity LED lights up or blinks when data is read from or written to the storage device or storage device add-on card. • Power Button/Soft-off Button header (PWR_BTN) The 3-1 pin header allows you to connect the system power button. Press the power button to power up the system, or put the system into sleep or soft-off mode (depending on the operating system settings). • Reset button header (RESET) The 2-pin header allows you to connect the chassis-mounted reset button. Press the reset button to reboot the system. 1-6 Chapter 1: Product Introduction