Asus PRIME X470-PRO Users Manual English - Page 64
APM Configuration, Charging USB devices in Power State S5
View all Asus PRIME X470-PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
RGB LED lighting When system is in working state This item allows you to turn the RGB LED lighting on or off when the system is in the working state. Configuration options: [On] [Off] When system is in sleep, hibernate or soft off states This item allows you to turn the RGB LED lighting on or off when the system is in the sleep, hibernate or soft off states. Configuration options: [On] [Off] Intel LAN Controller Enables or disables the Intel LAN controllers. Configuration options: [On] [Off] Intel LAN OPROM Enables or disables the Intel PXE OPROM. Configuration options: [On] [Off] Charging USB devices in Power State S5 This item allows you to chagre USB devices even when the system is at Power State S5. Configuration options: [Disabled] [Enabled] 3.6.6 APM Configuration The items in this menu allow you to set system wake and sleep settings. ErP Ready [Disabled] This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off. Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] Restore On AC Power Loss This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State] Power On By PCI-E This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed PCI-E LAN cards. Configuration options: [Disabled] [Enabled] Power On By Ring [Disabled] Disables Ring to generate a wake event. [Enabled] Enables Ring to generate a wake event. Power On By RTC This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake event and configure the RTC alarm date. When enabled, you can set the days, hours, minutes, or seconds to schedule an RTC alarm date. Configuration options: [Disabled] [Enabled] Chapter 3 3-16 Chapter 3: BIOS Setup