Asus PRIME Z590-P WIFI Intel 500 series Channel BIOS UM English - Page 36

GPIO3 Force Pwr Allows you to enable or disable GPIO3. Configuration options: [On] [Off] Wait time in ms after applying Force Pwr Allows you to set the wait time specified in milli second after Force Pwr is asserted before access the TBT controller. Configuration options: [1] - [5000] GPIO filter GPIO filter is needed to avoid electrical noise on PCH GPIOs during hotplug of 12V USB devices. Configuration options: [Disabled] [Enabled] DTBT Controller 0 Configuration Allows you to configure the DTBT Controller 0 Configuration options. For items without a pop-up menu, you can either enter a number within the valid input range or use the or to set the values. DTBT Controller 0 Configuration options: [Disabled] [Enabled] DTbt Root Port Type Allows you to select the TBT Root Port Type. Configuration options: [PCH Root Port] [PEG Root Port] TBT Host Router Allows you to enable the host router based on the ports available. Configuration options: [One port [Two port] Extra Bus Reserved Configuration options: [0] - [255] [56] One port Host. [106] Two port Host. Reserved Memory Allows you to set the reserved memory specified in MB for the Root Bridge. Configuration options: [1] - [4096] Memory Alignment This item is specified in bit. Configuration options: [0] - [31] Reserved PMemory Allows you to set the reserved prefetchable memory specified in MB for the Root Bridge. Configuration options: [1] - [4096] PMemory Alignment This item is specified in bit. Configuration options: [0] - [31] Reserved I/O Configuration options: [0] - [60] Thunderbolt(TM) OS select Windows 10 Thunderbolt support Configuration options: [Enable + RTD3] [Disabled] 36 PRIME / TUF GAMING Intel® 500 Series BIOS Manual